Skip to content
Combine bull and wordmark

Every signal.One smarter pick.

Combine weighs talent, opportunity, team context, risk, positional scarcity and your league settings into one player value you can defend.

Evaluation

Chase Brown

RB8 · Overall #10 · CIN · Bye 10

Combine score

93

Projected pts/g

11.1

Evaluatingdraft

Six signals, each incomplete on its own, resolving into one league-specific value.

CombineFrom draft to lineup

A different question every month

The tool that helps in July is not the tool that helps in November. Combine follows the decision, from an empty board to a playoff lineup.

CombineWhy league settings come first

Your format is not a filter. It is the model.

Replacement level is set by what your league actually starts, so the same player is a different asset in a different league. These are real recomputations from this board, not illustrations.

Full PPR → Standard

A third of a possession receiver's projected points came from receptions. Take those away and the position reorders.

Full PPR → Standard: how each player’s rank changes between the two formats.
PlayerBeforeAfterMove
Mack Hollins223541 318 places worse
Olamide Zaccheaus199365 166 places worse
Elijah Sarratt266420 154 places worse

1QB → Superflex

A second quarterback slot doubles the demand at the position, which collapses the replacement level and moves the whole tier.

1QB → Superflex: how each player’s rank changes between the two formats.
PlayerBeforeAfterMove
Josh Allen2471 246 places better
Drake Maye2502 248 places better
Trevor Lawrence2533 250 places better

Computed from the shared analytics snapshot as of 2026-09-11. Live external projection data is not connected in this build.

CombineInside the product

The whole workspace, running on real demo data

Every panel below is the actual interface with the actual board behind it. Nothing here is a screenshot.

Opens on a decision, not a scoreboard

What changed, what it means, and the next thing worth doing — before any chart.

Open Overview

Demo data

  • 1Puka NacuaWR1 · LAR0Strong value
  • 2Bijan RobinsonRB1 · ATL0Strong value
  • 3Jahmyr GibbsRB2 · DET0Strong value
  • 4Jaxon Smith-NjigbaWR2 · SEA0Strong value
  • 5Ja'Marr ChaseWR3 · CIN0Strong value
  • 6De'Von AchaneRB3 · MIA0Strong value

CombineThe signature ranking surface

The rankings board

Players sit in tiers, not in a straight line — because the gap between tier three and tier four is a cliff, and the gap between the fourth and fifth player inside a tier usually is not. The board keeps those breaks visible so you can make the next decision quickly.

Tier 1

Foundational7 players
  • Puka Nacua

    WR1 LAR · Bye 6

    1
    Projection17.5 pts/gVORP+143

    Strong value

  • Bijan Robinson

    RB1 ATL · Bye 11

    2
    Projection16.1 pts/gVORP+135

    Strong value

  • Jahmyr Gibbs

    RB2 DET · Bye 8

    3
    Projection16.0 pts/gVORP+133

    Strong value

  • Jaxon Smith-Njigba

    WR2 SEA · Bye 5

    4
    Projection16.7 pts/gVORP+132

    Strong value

  • Ja'Marr Chase

    WR3 CIN · Bye 10

    5
    Projection16.4 pts/gVORP+125

    Strong value

  • De'Von Achane

    RB3 MIA · Bye 6

    6
    Projection15.5 pts/gVORP+121

    Strong value

  • Amon-Ra St. Brown

    WR4 DET · Bye 8

    7
    Projection16.1 pts/gVORP+122

    Strong value

Tier 2

Elite5 players
  • Jonathan Taylor

    RB4 IND · Bye 14

    8
    Projection14.6 pts/gVORP+109

    Strong value

  • Chase Brown

    RB5 CIN · Bye 10

    9
    Projection14.5 pts/gVORP+108

    Strong value

  • Chris Olave

    WR5 NO · Bye 11

    10
    Projection15.2 pts/gVORP+106

    Strong value

  • James Cook

    RB6 BUF · Bye 7

    11
    Projection14.3 pts/gVORP+103

    Strong value

  • Christian McCaffrey

    RB7 SF · Bye 14

    12
    Projection14.1 pts/gVORP+101

    Strong value

Tier 3

Cornerstone9 players
  • Drake London

    WR6 ATL · Bye 11

    13
    Projection15.0 pts/gVORP+93

    Strong value

  • Ashton Jeanty

    RB8 LV · Bye 8

    14
    Projection13.7 pts/gVORP+94

    Strong value

  • Rashee Rice

    WR7 KC · Bye 10

    15
    Projection15.5 pts/gVORP+92

    Strong value

  • Zay Flowers

    WR8 BAL · Bye 8

    16
    Projection14.3 pts/gVORP+91

    Strong value

  • Kyren Williams

    RB9 LAR · Bye 6

    17
    Projection13.7 pts/gVORP+94

    Strong value

  • CeeDee Lamb

    WR9 DAL · Bye 7

    18
    Projection14.8 pts/gVORP+91

    Strong value

  • A.J. Brown

    WR10 NE · Bye 14

    19
    Projection14.4 pts/gVORP+90

    Strong value

  • Javonte Williams

    RB10 DAL · Bye 7

    20
    Projection13.6 pts/gVORP+90

    Strong value

Open the rankings

Orderable by Combine value, expert consensus, ceiling, floor, or your own positional need.

CombineHow it works

Eight steps, one continuous board

  1. 01

    Choose your format

    Teams, scoring, starting slots, superflex, keeper rules. This is the input the whole model runs on.

  2. 02

    Configure the league

    Enter settings manually for a demo, or connect a read-only Sleeper league to import its scoring, roster, ownership and draft context.

  3. 03

    Generate the rankings

    Projections recomputed under your rules, replacement level re-derived, tiers found from real breaks in value.

  4. 04

    Compare player evaluations

    Put players side by side with the league settings and model reasoning that separate them.

  5. 05

    Build the board

    Build a personal order and tiers, pin your own preferences, and keep the model's opinion visible beside yours.

  6. 06

    Draft with the assistant

    In mocks and supported read-only live rooms, recommendations account for your roster, the available pool, and modeled next-turn survival when the required evidence is usable.

  7. 07

    Manage every decision

    Waivers, trades, start/sit and roster analysis share the active league context while keeping provider facts and tool-specific model evidence separate.

  8. 08

    Audit changing assumptions

    Movement and status surfaces show the evidence the current snapshot carries and label authored inputs explicitly instead of implying a connected live news feed.

CombineDraft case study

The same slot, drafted two ways

A worked comparison of two approaches from the same seat using the model's dated demonstration snapshot.

Approach A — following a default platform board

  • Took the consensus board at face value, pick by pick
  • Reached a full round early for a quarterback
  • Stacked three low-ceiling running backs in rounds two to five
  • Missed the receiver value pocket in rounds six and seven
  • Left the last four rounds on veterans with no upside

Approach B — following the Combine board

  • Waited at quarterback until the tier flattened, six rounds later
  • Took the receivers the room let slide past their model value
  • Applied positional scarcity only where the cliff was real
  • Passed on an injury-risk back outside the recommended range
  • Spent the last four rounds on role-dependent upside

Modelled outcome — 12 teams · 1QB · Full PPR · redraft · pick 1.08

Projected weekly points
+8.4
starting lineup median
Starting-lineup floor
+6.1
25th-percentile week
Draft capital efficiency
+11%
value captured through tier discipline
Positional risk
−2 tiers
concentration at running back

A modelled comparison using this build’s dated demonstration data. It shows how the two approaches differ in projected roster construction — not a result any real manager achieved. Combine does not promise championships and cannot: a better process improves the distribution of outcomes, not any single season.

CombineWho it is for

One board, seven kinds of manager

Casual managers

You want to draft well without reading three podcasts a week.

UsesTiers, the recommendation, and the one-sentence reason behind it.

Competitive home leagues

You know the format cold and want an edge over people who also know it cold.

UsesValue edge, tier cliffs, and the places consensus is lazy.

High-stakes players

Entry fees make process discipline worth more than any single opinion.

UsesMock simulation, explicit risk/confidence readings, and league-specific opening auction values.

Dynasty managers

You are valuing four years, not four months, and age curves dominate.

UsesDynasty-mode rankings, age-aware model context, superflex/TE-premium settings, and explicit rookie uncertainty.

Analysts and creators

You need to show your work, not just publish a list.

UsesMethodology, subscore breakdowns, exports, and the disagreement prose.

Commissioners and multi-league managers

Six leagues, six formats, and no appetite for six different boards.

UsesSaved provider-league switching in supported workspaces, per-league context, and rankings that follow the active format.

CombineAccess

What the current build supports

Checkout and subscription entitlements are not active here. The cards below separate implemented capabilities, provider-dependent limits, and future plan packaging without presenting illustrative tiers as purchasable products.

Available now

Current build

The currently implemented Combine workspace.

  • League-adjusted player rankings and CSV export
  • Personal ranking boards and mock drafts
  • Read-only Sleeper league and live-draft workflows where evidence is available
  • Roster analysis, Start / Sit, Trade Lab, and waiver modeling
  • Saved provider-league switching in supported account workspaces
Open Combine

Provider limits

Capabilities depend on what each provider and evidence source actually supplies.

  • Yahoo discovery/preview may be available without full production activation
  • ESPN league activation is not implemented
  • No provider draft picks, lineup moves, waiver claims, or trades are submitted by Combine
  • FAAB, injury, matchup, and other live facts are withheld when current evidence is missing

Paid tiers not active

Not for sale

The codebase does not currently enforce a Rookie / Starter / Franchise subscription matrix.

  • No checkout is presented as functional
  • No eight-league or unlimited-league paid limit is advertised as enforced
  • No priority refresh, portfolio, creator-tool, or advanced-export entitlement is claimed
  • Plan packaging can be published after billing and feature gates exist end to end

Subscription pricing will be published only when checkout and matching product entitlements are implemented.

CombineIllustrative scenarios

Example ways managers could use Combine

The quotes below are synthetic product examples for this demonstration build, not customer testimonials or endorsements.

“The thing that changed my drafts was not the ranking, it was the sentence underneath it. I stopped taking players a round early because I could finally see who was actually going to be there.”
Dana R.Eleventh season, same twelve-team home league
“I run four leagues with four formats and I used to keep four spreadsheets. Watching the superflex board reorder itself the moment I flipped the setting was the moment I stopped keeping spreadsheets.”
Marcus O.Multi-league manager
“Our dynasty league argues about everything. Having the age curve written down, with actual numbers, ended about half those arguments — and made the other half more interesting.”
Priya S.Dynasty commissioner, 14-team superflex
“It is the first tool I have used that tells me when it is not confident. A rookie and a proven starter with the same projection are not the same bet, and this is the only board that says so out loud.”
Tobias L.High-stakes contest player
“I make content for a living, and the thing I need is a defensible position I can explain in ninety seconds. The subscore breakdown is basically my script.”
Renee C.Fantasy analyst and creator
“First year playing. I expected to be lost. Instead I understood why my board looked different from my friend's board, and I finished third.”
Sam W.First-season manager

Example scenarios written for this demonstration build. No real person, analyst, or organization has endorsed this product.

CombineQuestions

How this actually works

Every player carries eight scouting grades — production, opportunity, environment, efficiency, role security, durability, upside and floor — plus expected volume. The engine turns that volume into projected points under your exact scoring rules, works out the replacement-level player at each position from what your league actually starts, and ranks by the value above that replacement. Nothing in the ordering is hand-placed.

Your best draft starts
before you are on the clock.

Set your league format, let the board recompute, and find out where your room is about to overpay.